Internet for Anywhere

The InHand IR302 is an easy-to-use LTE cellular router. Simply plug it in, connect the existing InHand WiFi signal, and off you go. Using two SIM cards helps to make sure that your device is always connected to the network with the best signal. Up to date security features always keep your information safe.

Compact & Widely Compatible

The InHand IR302 is an easy-to-use LTE cellular router. Simply plug it in, connect the existing InHand WiFi signal, and off you go. Using two SIM cards helps to make sure that your device is always connected to the network with the best signal. Up to date security features always keep your information safe.

InHand InRouter302 Details

The IR302 CAT4 has two 10/100 Ethernet ports, dual-SIM, and a 2.4 GHz WiFi connection. It can use both 4G LTE and WiFi for a stable, always-on connection even in remote areas. It can also use a VPN to protect your IP address. Thanks to dual-SIM technology, the router can take two SIM cards, each from a different carrier. It will then scan both signals and use the card that provides the best signal. The device can also reboot itself if there is a malfunction without you needing to physically do so.

Your InHand IR302 kit has everything you need to get started. It has two cellular antennas to create a basic MMO configuration, 1 Ethernet cable, and 1 WiFi antenna to broadcast quality signal. With perfect outside conditions, the IR302 CAT4 router can reach speeds of up to 150Mbps. Real-world data speeds could vary depending on factors such as your carrier, signal strength and weather.

302ST1-Diagram

  • Speeds up to 150 Mbps
  •     2.4 GHz WiFi connection
  • For homes, offices, RVs, & commercial IOT applications
  • Works with AT&T, Verizon Wireless, & T-Mobile
  • Free management platform
  • All parts included for easy set up
  • Customizable
How does it work?
The InHand IR320 CAT4 Router works by broadcasting existing outside cell signals.

  1. The built-in antenna receives a cell signal from a tower.
  2. The router then broadcasts the signal via radio waves to your mobile devices such as phones, tablets, and laptops.
Technical Specifications
Technical Specifications
INROUTER 302 HARDWARE SPECIFICATIONS
HARDWARE PLATFORM
CPU Platform 580MHz
RAM 128MB DDR2
Flash 32MB SPI
INTERFACE
Ethernet Port 2* 10/100Mbps fast Ethernet port, LAN/WAN port 1.5KV network isolation transformer protection Note: IR301-FQ02(- -W) has one port only
Serial Port IR301 has 2 serial ports. 1*RS-232 and 1*RS-485 in RJ45 form. IR302 has no serial port.
Power Supply DC9- -36V, over-current protection, anti-reverse connection, 2 PIN industrial terminal block
Reset Button Pinhole reset button
SIM Card Dual drawer-type SIM card slots. 2FF SIM
Wi-Fi (Optional) IEEE 802.1 1b/g/n, 150Mbps
Antenna Connector 3G/4G: SMA x 1 Wi-Fi: RP-SMA x 1 Note: North America models (FQ38, FQ33) have 2 x SMA 4G antennas. IR301-FQ02(-W) has only 1 SMA 4G cellular antenna
Ground Terminal Supports
MECHANICAL SPECS
Dimensions (mm) 90X90x25mm
Weight (g) 240g
Installation Method Panel mounting, rail mounting
Protection Rating IP30
Housing Metal
Cooling Fanless
POWER RATE
Working Power 200-220mA@12V
Standby Power 240mA@12.0V
Peak Power 90mA-120mA@12V
WI-FI TRANSMIT POWER
Transmit Power 802.11b: 16dBm +/-2dBm (11Mbps) 802.11g: 16dBm +/-2dBm (54Mbps) 802.11n@2.4GHz: 16dBm +/-2dBm (HT20 MCS7) 802.11n@2.4GHz: 16dBm +/-2dBm (HT40 MCS7)
AMBIENT ENVIRONMENT
Storage Temperature -40 ~ 85℃
Operating Temperature -20 ~ 70℃
Ambient Humidity 5 ~ 95% (non-condensing)
INDICATOR
LED Power, Status, Cellular, Wi-Fi, cellular Signal
EMC
Static EN61000-4-2, level 2
Radiation Electric Field EN61000-4-3, level 2
Pulsed Electric Field EN61000-4-4,level 2
Surge EN61000-4-5,level 2
Conducted Disturbance Immunity EN61000-4-6, level 2
Shock Wave Resistance EN61000-4-12, level 2
Power Frequency Magnetic Field Resistance EN61000-4- -8, horizontal Ivertical 400A/m (>level 2)
PHYSICAL SPECS
Shockproof IEC60068-2-27
Vibration Resistance IEC60068-2-6
Free Fall IEC60068-2-32
CERTIFICATE
CE, FCC, PTCRB, IC, Verizon, AT&T
INROUTER302 SOFTWARE SPECIFICATIONS
NETWORK CONNECTION
Network Access APN, VPDN, PrivateNetwork
Access Authentication CHAP/PAP
LAN Protocol ARP
WAN Protocol PPP, PPPoE, DHCP
Network Type GSM/GPRS/EDGE, UMTS/HSPA+/EVDO/TD-SCDMA, TDD LTE/ FDD LTE (Please refer to the Ordering Guide for frequencies.)
NETWORK PROTOCOL
IP Application Ping, Route Trace, DHCP Server, DHCP Relay, DHCP Client, DNS relay, DDNS, Telnet, SSH
IP Routing Static routing, Dynamic routing
NAT Supports network address
SECURITY
Network Security Stateful Packet Inspection (SPI), DoS attack defense; Multicast filter/Ping probe packet, Access Control List ACL); Content URL filter, port mapping, virtual IP mapping, IP/MAC binding
Data Security Supports PPTP, L2TP, GRE, IPSEC VPN (IKEv1, IKEv2), OpenVPN protocols Supports CA digital certificate
NETWORK CONNECTION
Reliability VRRP hot backup
Link detection Sends heartbeat packets to detect, auto redials when disconnected
Dual SIM Failover Device runs self – detection, auto recovers from malfunctions
WLAN (OPTIONAL)
Protocol IEEE 802.11b/g/n
Rate Up to 150Mbps
Mode AP, STA and WDS modes
Security Open system, shared key, WPA/WPA2 certification WEP/TKIP/AES encryption
Transmission Distance 100 meters by line of sight (Actual transmission distance depends on environment of the site.)
NETWORK MANAGEMENT
QoS Management Bandwidth limit,IP speed limit
Configuration Telnet, web, ssh, and console
Upgrade Method Web, Device Manager
Logs Local system logs, remote logs, and serial export of logs. Power down saving of important logs.
SMS Functions Status query, configuration, restart
Dial-on-demand Dial-on-demand, data / SMS activation
Network Management Supports InHand DeviceManager, batch management
SNMP SNMP v1/v2c/v3҅support SNMP TRAP
Traffic Management Supports data traffic threshold, traffic statistics and traffic alarm
Alarms System restart alarm, LAN port online/offline alarm, data traffic alarm, SIM card failure alarm, etc.
Maintenance Tools Ping, route tracking, network speed test
Status Query System status, modem status, network connection status, and routing status
Kit Includes
 • InHand IR302 CAT4 router
 1 WHIP wifi antenna
 2 WHIP cellular antenna
 Wall power source

 

 Install brackets
 1 ethernet cable
Installation
  1. Insert SIM card into the slot labelled “SIM”.
  2. Connect the power adapter.
  3. Search for and connect your device to the InHand WiFi using its unique wireless name and WiFi password. These can be found on the device’s label.

Our trained product specialists can work closely with you to determine the best solution for this powerful piece of hardware.

 

Satisfaction Guaranteed

24/7 Award Winning Support

30 Day Money Back Guarantee